Experimental Section:

Materials:

• Polyester resins (domestic and imported)

• TGIC curing agent

• Titanium dioxide and barium sulfate fillers

• Common powder coating additives

Preparation:

Polyester resin, curing agent, and additives were mixed, extruded, and pulverized into a powder with a particle size of 20-45μm. The powder was then used for electrostatic spraying on aluminum profiles.

Results:

Resin Selection:

Among the tested polyester resins, domestic resin B performed best in aging and boiling water resistance tests. It was selected for its superior weathering performance.

Curing Agent Dosage:

An optimal dosage of 14.5–15.5g per 200g of resin was found to achieve the best coating performance. Too little curing agent led to incomplete curing, while excessive amounts affected the texture.

Effect of Fillers:

The type and amount of barium sulfate affected the coating’s texture. Finer grades of barium sulfate created a stronger texture and better surface roughness.

Pigments:

Inorganic pigments were preferred for their better boiling water resistance, with brighter pigments showing greater color changes during testing.

Conclusion:

The study successfully developed a weather-resistant textured powder coating suitable for aluminum profiles used in outdoor and architectural applications. By optimizing the resin type, curing agent, and fillers, the powder coating achieved excellent boiling water resistance, durability, and color retention, making it ideal for aluminum profile coatings.